Lighting Contractor Thurgoona, NSW
Fittings chosen for the room they are going in, and fitted to the right insulation clearance.
or call (02) 6022 4003
AS/NZS 3760 & 3012
AS 2293 Compliance Reporting
Licensed NSW & VIC
ISO 9001 & 45001 Certified
24-Person Local Team
Downlight and outdoor lighting installation is the work people put off the longest and notice most once it is done. A dark hallway, a driveway you cannot see the end of, a kitchen lit from behind wherever you stand.
BOSCHETTI fits lighting for the room it is going in. Like most lighting contractors, we make that call before cutting holes, because moving a downlight afterwards means patching the ceiling.
What does a lighting contractor do Thurgoona?
A lighting contractor selects, positions and installs lighting for homes and commercial buildings, indoors and out. The job includes fitting selection, insulation clearance and lux levels. BOSCHETTI covers LED downlight replacement, outdoor and garden lighting, sensor and security lighting, commercial retrofits, and lighting design verified against National Construction Code lux requirements.
LED Downlight Installation
Swapping halogens for LEDs is the most common lighting job around here, and clearance to insulation is the key detail.
Only IC- and IC-4-rated fittings may be covered by insulation. A non-IC LED still needs its gap, no matter what the box says. We fit the right rating and beam angle, so the ceiling stays as safe as it was and the room ends up brighter.
Outdoor and Garden Lighting Installation
Acreage driveways around Jindera and Table Top run long enough that the difference between lit and unlit is the difference between using the garden after dark and not.
Entries, paths, decks and driveways are wired and rated for outdoor use rather than run off an extension lead through a window. Weather here means the IP rating must match where the fitting sits.
Sensor and Security Light Installation
A poorly aimed sensor light lights the neighbour's bedroom and triggers on every possum that crosses the fence, which is why most people eventually switch them off.
Positioning is the whole job. We set them to cover the approaches to the house, at the right height and the right sensitivity, so they come on when someone arrives and stay off the rest of the night.
Commercial LED Lighting Retrofits
Offices, warehouses, retail floors and factories running old fluorescent or metal halide lighting usually pay for it twice: in electricity and in relamping.
Retrofits are staged around trading hours or class times so nothing stops. We measure consumption before and after, which turns the payback period into a figure rather than a claim.
Commercial Lighting Design
A commercial fit-out has to hit lux levels a building surveyor will sign off, and finding that out at handover is the expensive way to learn it.
We model illumination to National Construction Code requirements, verify the levels on completion and issue the certificate, so the lighting is signed off with everything else rather than after it.
What Our Lighting Customers Say
Want the light where you need it?
Fittings chosen to suit the room and the ceiling. Phone (02) 6022 4003.
Your Trusted Electrical Partner
A Top-To-Bottom Electrical Business Doing Everything From The Power Pole To The Power Point, All Things In Between, Including Generation and Renewables Projects.
Hours
Monday | 7:00am to 4:00pm |
Tuesday | 7:00am to 4:00pm |
Wednesday | 7:00am to 4:00pm |
Thursday | 7:00am to 4:00pm |
Friday | 7:00am to 4:00pm |
Saturday | Closed |
Sunday | Closed |
Copyright © 2026 Boschetti Industries. All Rights Reserved. Terms and Conditions of Trade